冰盾🧊GAMA車頂玻璃外貼冰盾🛡️膜！GAMA車頂玻璃S7隔熱冰盾🛡️保護膜！
📮影片https://youtu.be/EfDd6Hv_XpE
冰盾🛡️玻璃盾甲的數據
產品型號：冰盾S7🛡️
品牌：GAMA翠光
產品：GAMA天窗隔熱外貼膜
材料：TPU材質
規格：1..52米*15米
產品厚度：7 Mil
顏色：淺藍/淺黑
性能：紅外線99 % 紫外線99% 透視率75%
功能：高隔熱 超強防爆 超強抗腐 超強抗黃變持久耐用 雙塗層 熱修復 增亮 抗污 抗寒
產品特色
TPU特性如下 TPU-S7
1. 高耐磨性、耐衝擊性
2. 耐寒性佳：可耐-35℃下低溫
3. 耐高溫：可承受120℃以上高溫
4. 良好機械性：承載能力、抗衝擊力佳
5. 耐油脂、耐水，視TPU種類而具有特殊性
6. 抗氧化性佳、超強防爆、超強抗腐、超強抗黃變
7. 加工性良好：可用常見加工方式加工
8. 硬度範圍廣：硬度增加仍有良好彈性與韌性
-）使用1cm小碎石進行模擬測試將冰盾貼在玻璃上並垂直固定，距離40cm的距離下使用壓縮空氣衝擊，衝擊質量為100公克、直徑為3.2至4.8mm的撞擊下，在玻璃冰盾的保護下玻璃表面幾乎毫無損傷！
-）本產品冰盾保護膜經過水與沙的混合狀態下進行10000次的往返測試無嚴重刮痕現象.
✅隔熱效果：熱焦耳BTU從2197降到35.6
feature of product
TPU-S7
1. High abrasion and impact resistance Impact protection
2. Cold resistance: withstand low temperature under -35℃
3. High temperature resistance: withstand high temperature above 120 ℃
4. Mechanical properties well: good bearing capacity and impact resistance
5. Oil resistance, water resistance, special depending on the type of TPU
6. Oxidation resistance well, super explosion-proof, super anti-corrosion, super anti-yellowing
7. high workability: can be processed by common processing methods
8. Wide range of hardness: increasing hardness still has good elasticity and toughness
Wear-resistant description:
-) Use 1cm small gravel to carry out a simulation test and fix the TPU on the glass vertically. At a distance of 40cm, use compressed air to impact. The impact mass is 100 grams and the diameter is 3.2 to 4.8mm. Under the impact, under the protection of TPU glass There is almost no damage to the lower glass surface!
-) The TPU protective film of this product has undergone 10,000 round-trip tests under the mixed state of water and sand without serious
Thermal Effects: Thermal Joule BTU reduced from 2197 to 35.6 .
留言列表
